- Flushing Pump
- High Pressure Pump
- Nitrogen Pump
- N2 Membrane
- N2 Tank
- N2 Vaporizer
- Leak Detector
Flushing Pump 1070 m3 @ 6bar
This is a centrifugal high capacity low pressure pump with a flow rate of 1070M3 PH at 6 barg pressure, this pump is typically used for applications such as flushing and chemical cleaning, the unit is powered by a electric motor making the unit very efficient as well as allowing it to work in many different fields, this is all packaged within a crash frame for safe and easy transportation.
High Pressure Pump
High Pressure Pump 200m3 @ 60bar
High pressure piston pump unit with a pressure rating at 300 barg with a flow rate of 405 LPM. The unit is driven by a diesel engine that is fitted with automatic engine over speed shut down, spark arrestor & battery isolator. These are all packaged within a DNV approved crash frame for safe and easy transportation.
High Pressure Nitrogen Pump
The unit is a fully Zone II skid mounted self-contained liquid nitrogen pumping unit, complete with a non–fired vaporizer system. The skid would incorporate a crash cage, liquid nitrogen triplex pump, centrifugal boost pump, liquid nitrogen non-fired vaporizer, diesel engine complete with Pyroban Zone II protection kit and all necessary controls and instrumentation for operation, the unit also comes complete with built in flow meter and over pressure shut-down safety systems.
Nitrogen Membrane Generator
Pressurized air from an air source is fed into the system at a pressure between 6.9 – 15.2 barg. The air is filtered, heated and fed into the membranes where water oxygen and any other vapors are removed and a dry nitrogen product is generated. Product purity can be adjusted via the control panel to suit the required requirements. The unit is packaged in a CSC approved 20ft container to allow safe transportation and easy installation.Capacity - 830CFM – 15454CFM Purity - 95% - 99.9%
Nitrogen Tank 2000USG.
The ISO 2000USG (4.5 Bar) unit is a vacuum-insulated liquid gas transportable storage/operation tank designed for liquid nitrogen. The unit meets DNV requirements and is also a CSC approved 10ft container.
The unit is an ambient vaporizer, the unique design allows ambient air to pass through the vanes warming the liquid nitrogen allowing it to be released in a gaseous state. The unit is assembled in an approved DNV crash frame to allow safe storage and easy transportation.
Compressor XRVS 1050 @ 24barg
This unit is a silenced, two stage, oil injected screw compressor built for effective working use. The unit is powered by a diesel engine and comes complete with a built in after-cooler. The unit is built into a 20ft CSC approved container for easy transportation.
PHD4 Leak Detector
The PHD-4 is able to detect very small leaks in objects that have a slight helium/N2 pressure inside. It is sensitive to helium concentrations as small as 2 ppm- equivalent to a leak rate of 5 x 10-6 atm-cc/sec.